Thursday, June 11, 2009

Snipping Sewing and Sending Blocks for Adrienne

For snip.sew.send. this month, Adrienne sent vintage sheets she thrifted and some were hand dyed! These were new fabrics for me and it was awesome to work with something different. She requested Denise Schmidt Hop, Skip and Jump style blocks.

Following Zonnah, I figured I would share how I ended up accomplishing the task. If nothing else, it's a reference for me to go back to. This was my first time doing wonky free style blocks, so I followed the suggestion of another member of the bee on how to do it.

I cut all the pieces I was going to be working with a little longer than the height of the finished block (I cut to 7" to allow some leeway for a 6.5" block)

For each piece, I put the new piece on top of the other pieces that were already pieced. Here the orange piece is new and it's already been cut at angle from a previous step.
Snip.Sew.Send Block for Adrienne


Then I decided how wonky I wanted the seam to be and cut both pieces at that angle (making sure to leave a little extra for the seam allowance.
Snip.Sew.Send Block for Adrienne


Then I lined up the edges (right sides together) and off set them 1/4" so the pieces would still line up more-or-less straight after I sewed the seam.
Snip.Sew.Send Block for Adrienne


After I had all my pieces sewn together, I trimmed the height to the appropriate length (here 6.5"), and called it good. Here are the results:
Snip.Sew.Send Block for Adrienne


And an extra block that Adrienne said she's going to trim for another part of the quilt.
Snip.Sew.Send Block for Adrienne

1 comment:

  1. That's a nice combo of fabrics with the vintage piece! Good for you for trying wonky.

    ReplyDelete

I love to hear from you and I like to send responses to comments so make sure to leave a way for me to do that!